Improved Iron Cutter
About the Practice
Saving Labor and manforce
Detail:
Rahman’s iron is a useful cutter, which can incisively cut iron multi-directionally. Iron materials such as pipe, rods, sheet etc can be cut with his iron cutter. Needing just a person to operate, four kinds of motion can be obtained from this cutter viz. forward and backward, up and down, right and left, and for cutting at an angle the cutter can be rotated on its vertical axis. The cutting range varies from one inch to eight inch; flat sheets of iron of any length can be cut using this cutter. This iron cutter is similar to angle cutting band sawing machine. Hacksaw has been replaced by toothed cutter and can rotate about its vertical axis, which is perpendicular to the plane of the ground. Prior art search discloses different types of iron cutters using hacksaw blade. The present iron cutter can cut in any angle from 0 to 180 degree while the available cutters can cut only from 0 to 45, 0 to 60 and 0 to 90 degree.
About the Innovator
Address: Anatnag, Jammu & Kashmir
City: Anantnag
State: Jammu & Kashmir
PIN Code 192101
Website: http://nif.org.in/innovation/Improved_Iron_Cutter/464
Practice Details
Link: Rahman’s iron is a useful cutter, which can incisively cut iron multi-directionally. Iron materials such as pipe, rods, sheet etc can be cut with his iron cutter. Needing just a person to operate, four kinds of motion can be obtained from this cutter viz. forward and backward, up and down, right and left, and for cutting at an angle the cutter can be rotated on its vertical axis. The cutting range varies from one inch to eight inch; flat sheets of iron of any length can be cut using this cutter. This iron cutter is similar to angle cutting band sawing machine. Hacksaw has been replaced by toothed cutter and can rotate about its vertical axis, which is perpendicular to the plane of the ground. Prior art search discloses different types of iron cutters using hacksaw blade. The present iron cutter can cut in any angle from 0 to 180 degree while the available cutters can cut only from 0 to 45, 0 to 60 and 0 to 90 degree.
Manufacturing Capacity: b) Design Support